Email:sales@lonrace.com           Phone: +86-13961629780
Integrator
Home » Products » Integrator

Product Category

Product Category

Contact Us
Contact Us

Integrator

Sort  

Integrator is a circuit component used for integrating input signals. Its working principle is based on the charging and discharging process of capacitors. In practical applications, integrators are commonly used in signal processing, voltage measurement, filtering, and other applications. By integrating the input signal, signal accumulation, smoothing, or filtering can be achieved.

Integrator needs to be used in combination with Rogowski Coil. The output signal is the differential of current versus time. By integrating the output voltage signal, the input current can be truly restored. The detection frequency is wide, ranging from 50 Hz to 60 MHz. Integrator and Rogowski Coil are a very flexible system that is suitable for detecting AC leakage current, large current, high harmonic current, complex waveform current, transient impulse current, phase, electrical energy, power, power factor, etc. Single or multiple Rogowski Coils can be connected for simultaneous detection, making it convenient to use and easy to operate.

  • S9 Mini Integrator IP20
    Model VPI-S9

    Rated output: 333V AC rms 4V DC(true-rms)

    Maximum Output(overload): 4.5V AC peak / 4.5V DC

    Output Ripple factor: 1% /Default 5% (relay to Response time)

    Response time: ≤1us Default 100ms(adjustable)

    Power consumption : 70mW /100mW

    Bandwidth: 10Hz to 10kHz / 30Hz to 1kHz

    Power supply: 5V or 6-12V / 5V or 7-12V
  • D1 Integrator Kit 4-20mA Output
    Model :VPI-D1-20mA
    Rated output:5V AC rms/5V DC(true-rms)/4-20mA
    Maximum Output(overload):10V AC rms/5V DC/25mA
    Output Ripple factor:0.5% Default 5% (relay to Response time)
    Response time:≤1us Defult 100ms(adjustable)
    Power consumption:150mW/200mW/Bandwidth 10Hz to 20kHz/ 20-2kHz
  • D1 Integrator Kit 0-10V Output
    Model: VPI-D1-10V
    High read accuracy 0.2%
    Wide power supply arrange:4-12VDC or 24VDC
    High bandwidth for measurement 5 to 20kHz
    Lower zero drift down to 1.5mV
  • ATP Integrator Kit 0-1A Output
    Model :VPI-ATP-01
    Rated output : 1A AC rms
    Maximum Output(overload) :1.5A AC rms
    Rated ratio: 100A /600A/1000A/3000A/6000A
    Read Accuracy:0.5% typical at 1%(≥10A) to 110% of rated Current @25℃
    Phase error:≤0.5°
    Linearity:±0.2% of reading(10% to 120% of range)
    Bandwidth:30Hz to 5kHz
    Maximum Burden:0.5Ω(each phase)
    Measurement:Secondary CTs to measure output of integrator
    Power consumption:10W
    Output on 0A (zero drift)≤0.01A
    Temperature drift:200ppm/℃
    Weight:185g
    Dimension:114*100*22.5mm
    Power supply:12V DC

QUICK LINKS

PRODUCTS

STAY IN TOUCH

  WhatsApp: +86-13961629780
 Skype: lonrace
 Tel: +86-51081602822
 Phone: +86-13961629780
  Email:sales@lonrace.com 

NEWSLETTER

Please leave your email so that we can send you the latest products and information from time to time
 Copyrights 2022 Verterpower Technology Co., Ltd. All Rights Reserved.  Sitemap  Supported By Leadong