D1 is a Industrial Rogowski coil integrator installation in distribution box,in a plastic 1 module DIN-RAIL enclosure, powered directly from the mains.D1 can be combined with any model Rogowski coils.
The available values are: 0-5VDC,0-5VAC,4-20mAC.
| Model | D1.1 | D1.2 | D1.3 |
| Rated output | 5V AC rms | 5V DC(true-rms) | 4-20mA |
| Maximum Output(overload) | 10V AC rms | 5V DC | 25mA |
| Output Ripple factor | 0.50% | Default 5% (relay to Response time) | |
| Response time | ≤1us | Default 100ms(adjustable) | |
| Power consumption | 150mW | 200mW | |
| Bandwidth | 10Hz to 20kHz | 20-2kHz | |
| Rated Input | 100A | ||
| 600A | |||
| 1000A | |||
| 3000A | |||
| 6000A | |||
| Read Accuracy | 0.5% typical at 1%(≥10A) to 200% of rated Current @25℃ | ||
| Phase error | ≤0.5° | ||
| Linearity | ±0.2% of reading(1% to 200% of range) | ||
| Minimum Current measurement | 1A (Ripple 100mA) | ||
| Output on 0A （zero drift） | ≤2mV | ||
| Temperature drift | 200ppm/℃ | ||
| Weight | 60g | ||
| Dimension | 90*61*18mm | ||
| Power supply | 12V or 24V(best performance on 24V default) | ||
| Operating temperature | -20℃ to 70℃ | ||
| Storage temperature | -30℃ to 90℃ | ||
| Relative humidity: | 80% max.without condensation | ||
| Protection degree: | IP20 | ||
| Other requirements,please contact us to OEM. | |||
Home About Us Products Resource News Contact Us Privacy Policy